Share

SPARTAN INC.

HOME

X

ENGINEERING. DESIGN. FABRICATION.
Our Goal: Quality & Customer Satisfaction


Spartan Inc.’s Facility encompasses approximately 8 acres in downtown Bakersfield.  The facility includes 6,700 sq. ft Office/Design/Engineering Area; 34,941 sq. ft of Warehouse Area;  and 83,090 sq. ft of Fabrication Area, with Blast & Paint Booth, and Office Space available for Sub-Contractor’s and 3rd Party Inspection Agencies.

Spartan Inc. is a full service Engineering, Design, and Fabrication Company which employs highly skilled engineers, designers, project managers, supervisory personnel, and craftsmen in all disciplines. Our staff is known for their strong technical and design expertise along with excellent management credentials with emphases on quality. 

ENGINEERING & DESIGN

X

Spartan Inc.'s design team has over 60 years combined experience in Facilities, Pipe, Vesel, and Field Construction design.  Spartan utalizes the latest in AutoCAD/CADWorx, and Caeser II Software.

OUR ENGINEERING & DESIGN SERVICES INCLUDE:

  • CONTROLS SYSTEMS
  • FACILITIES ENGINEERING
  • CIVIL/STRUCTURAL
  • ASME PRESSURE VESSEL DESIGN
  • PROJECT & PERSONNEL MANAGEMENT
  • PIPING SYSTEMS DESIGN & LAYOUT
  • ELECTRICAL/INSTRUMENTATION SYSTEMS
  • FIELD WALKDOWNS
  • CONSTRUCTION SUPPORT
  • OIL AND CHEMICAL REFINERIES
  • OIL PRODUCTION AND HANDLING FACILITIES
  • GAS PLANTS
  • WATER TREATMENT FACILITIES
  • FABRICATION AND CONSTRUCTION PROCEDURES
  • COMPUTER AIDED DESIGN AND DRAFTING (CAD)
  • SAFETY MANAGEMENT AND TRAINING

FABRICATION

X
Section image unnamed

OUR FABRICATION SERVICES INCLUDE:

  • ASME PRESSURE VESSEL CODE FABRICATION
  • PORTABLE/SKID MOUNTED EQUIPMENT IN ANY CONFIGURATION
  • PERMANENT INSTALLATION EQUIPMENT SKID SYSTEMS
  • PRODUCT METERING AND LACT UNITS
  • LAUNCHER AND RECEIVER SYSTEMS
  • PRODUCT DISTRIBUTION SYSTEMS
  • REPAIR AND ALTERATION OF EXISTING SYSTEMS AND VESSELS
  • STRUCTURAL STEEL FABRICATION

EQUIPMENT:
  • 30' x 20' x 70' Paint Booth
  • Plasma Table
  • Plasma Cutter
  • Diamond Drill Press
  • Jet- 10" Horizontal Band Saw
  • 10' x 20'  Burn Table
  • Pipe Bender
  • Press Break
  • Shearing
  • Rolling
  • Sub Arcs
  • Gantry Crane up to 80 tons

AMERICAN SOMOA

X

Spartan Inc. has completed prefabricating and pretesting a bottom loading fuel facility for Pago Pago, American Samoa.  It was designed to be shipped in pieces, and reassembled with little to no onsite fabrication with individual interconnecting units.  This fuel facility has 3 lanes with either, Mogas, Diesel, or Jet Fuel.

MB PETROLEUM

X
Section image 600 img 0100

MB Petroleum is one of the largest oilfield service companies in the Middle East.  The MB Petroleum group has a presence in more than twelve countries, with offices in Europe, the Middle East and Asia Pacific.  The group provides drilling and has integrated well services in Oman, Germany, Hungary, China, Russia, Syria, Saudi Arabia, Qatar and Yemen.


Storage Tanks

Spartan Inc is fabricating 4 Storage Tanks for MB Petroleum.  The Storage Tanks are 102" OD x 24' seam to seam 125 PSI 450° F Section VIII Division 1 Pressure Vessels.  The Vessel piping fabricated to ASME B31.1 Structural welding conformed to the requirements of AWS D1.1. 
 
 

Gauge Tanks

Spartan Inc is fabricating 6 Gauge Tanks for MB Petroleum.  The Gauge Tanks are 84" OD x 5 seam to seam 50 PSI 120°F Section VIII Division 1 pressure vessels.  The Vessel process piping fabrication to ASME B31.3 structural welding conformed to the requirments of AWS D1.1.

 

FIREGUARD FUEL TANKS

X
Section image fire guard

FIREGUARD® TANKS
Spartan, Inc. fabricates and delivers quality aboveground FIREGUARD®  storage tanks. 

  • FIREGUARD®  was the first AST of its design to obtain a UL listing for secondary containment

  • FIREGUARD®'s secondary containment can be tested on-site with standard testing procedures.

  • FIREGUARD®'s exterior steel wall provides superior weatherability and low-cost maintenance.  Unlike concrete, cracking or spalling will never be a problem

  • FIREGUARD®'s  unique thermal insulation material is 75% lighter than concrete; reducing shipping, installation, and relocation costs.

  • FIREGUARD®  technology is patented under U.S Patent #5695089 and # 5809650 for "Lightweight Double Wall Storage Tank"

  • FIREGUARD®  is a UL approved core component for the 2244 system Listing


FIREGUARD® TANKS MEET ALL YOUR STANDARD NEEDS

 

  • UL 2080 Listing "Fire-Resistant" Tank

  • UL 2085 Listing " Protected" Tank

  • Both the Inner and Outter steel tanks are built to UL standards

  • Uniform Fire Code UFC- Article 79 as a "Protected Tanks"

  • UL 2244 Aboveground Flammable Liquid Tank System

  • National Fire Protection Association (NFPA) 30 and 30A

  • International Fire Code (IFC) 2000-Chapter 34

  • Ballistics protection per UFC Article 79, and per UL2085

  • California Air Resources Board (CARB) testing requirements for air emissions

  • Steel Tank Institute (STI) Standards F-941 for Thermally Insulated Aboveground Storage Tanks

COMPANY PROFILE

X
Team

JOHN WOOD

FABRICATION SPECIALIST, and ASME:  Mr. Wood has over 30 years of professional experience in project management, project coordination, design supervision and all phases of piping design including piping layouts, platform orientation, checking, material take off, piping isometrics, piping stress analysis, estimating, planning and scheduling. Mr. Wood also has extensive construction field experience in resolving design problems and construction management. Experience in both upstream oil production facilities and downstream facilities such as dehydration plants, water plants, shipping stations, gas plants, cogeneration facilities and refineries.
 

ARCHIE ALLISON

DOCUMENTATION:  Mr. Allison has over 44 years of experience in various aspects of the petroleum industry in Western & Southern US, Arctic Alaska, Colombia, Ecuador, Venezuela, Qatar, UAE, Indonesia, Syria, Oman, and Western Siberia.  Experienced in equipment, facilities operations, design, construction and analysis of exploratory and production gas and oil wells onshore and offshore. Background includes extensive equipment knowledge on the application, operation, troubleshooting, repair, calibration and maintenance of multiple brands and models of gas and liquid meters and recorders, controllers, control valves, pressure and temperature recorders, pilots and production equipment.


DAVE CAMACHO

PRINCIPAL PIPING DESIGNER:  Mr. Camacho has 33 years of design experience.  His experience ranges from heavy layout, checking, and drawing of major process equipment and facilities, both aboveground and underground to process plant and refinery field experience. He is familiar with Industry design practices and codes, CAD file management and CAD software.  Advanced capabilities in preparation of drawings in 3D and 2D include; piping and instrument diagrams, piping arrangement plans and elevations, piping isometrics/ underground piping and drawing plans, piping shop fabrication spools, piping stress studies and analogs, plot plans and foundation location plans, pipe supports, platforms and other steel details, vessel fabrication drawings, SPCC studies/ Firewater.  The type of facilities Mr. Camacho has worked on are grass-roots refineries, oil, water, and gas plants, pipelines and tank farms, geothermal power plants, compressor units, meter stations, and loading stations. 


TOMMIE DICKIE

SHOP FOREMAN:  Mr. Dickie has over 30 years experience of tank fabrication in ASME, API650, API12F, UL142, UL58, 2085 vaulted tanks, and galvanized water storage. Mr. Dickie also has over 40 years experience in shop fabrication equipment, shear, press break, plate rolls, angle rolls, flanges, and band saw.  In addition, experience in metal fabrication including beam fabrication, lappers, platforms, and truck utility beds.


DAVID PHINNEY

GENERAL MANAGER: Mr. Phinney has  20 years of experience with managing, maintaining and operating tactical combat refueling systems and assisted with the revision and development of tactical fuel system stock listings and new equipment fielding.  Mr. Phinney currently manages Spartan Inc’s, Quality Assurance Program along with the ASME code stamp accreditation and fabrication projects.


HENRY (ENRIQUE) AVILA

QUALITY CONTROL/WELDING MANAGER (CWI): Mr. Avila has over 24 years of experience in the various areas of piping fabricatin, installation, and welding.  Mr. Avila's experience also includes fabrication shops, pipelines, power plants, solar plants, nuclear plants and oil refineries.  Mr. Avila's extensive welding experience encompasses Carbon, Chrome, Aluminum, and Stainless Steel, in addition to GMAW, GTAW, SMAW, GCAW and Orbital welding procedures and processes.  Mr. Avila currently holds a Certified Welding Inspector certification through the American Welding Society.

CONTACT US

X

3030 M Street

Bakersfield, CA

Phone: 661-327-1205

Fax: 661-327-1206

Email: info@spartaninc.net

Send Us A Message




What's + ?

Share this site